Motorcycle Windshield Mould Calculator

Synchronized inputs and live graphic for your plywood mould profile. Enter either the desired finished Acrylic Width or the flat Acrylic Width. Both inputs synchronize automatically, and the plywood mould size updates with them.

Finished Acrylic Length (Front-To-Back)

mm

Finished Acrylic Width

mm

Acrylic Thickness

mm

Mould Height (Front & Back)

mm

Flat Edge Each Side

mm

Acrylic Bending Angle

°

Live Mould Graphic

Front View

Beam Side View

Select Beam

Selected beam cutting outline: Beam Length (front-to-back) × Cut Height. S1/S3 stay at the upper part; S2 keeps the full calculated height. This is not a longitudinal mould curvature.

Tin Sheet Cutting Size

This is the flat metal sheet to form a continuous curved surface over the mould. It includes the curved top span, both flat edge sections and your extra overhang allowance.

Tin Sheet Flat Cutting Width—

Tin Sheet Cutting Length—

Mould Surface Developed Width—

Mould Front-To-Back Length—

Beam Support Cut List

Support positions are measured from the left side. S1 and S3 are upper-half-height supports; S2 retains its full calculated height. Cut Height is the actual board height. Laser beam panels use the adjustable Mould Length.

Calculated Values

The calculated flat Acrylic Width represents an ideal centreline developed length with no allowance for trimming or heating shrinkage. The finished Acrylic Width and automatically adjusted plywood Width are theoretical geometric values, not guaranteed production dimensions.

Export Note: The Laser File contains two identical 1:1 curved Front/Back sheets and one 1:1 rectangular panel per beam, each on a separate actual-size PDF page. The Dimension Plan contains measurements and the beam cut list. No laser kerf compensation is applied.